The use of abrasive cutting machine and precautions

R&D of science and technology is the driving force for the continuous progress of society. The use of large-scale machinery has led to the continuous advancement of industrial civilization. As a part of the cutting machine industry, we always aim at innovation and serve our customers. Welcome everyone to discuss cooperation. Details:/
Grinding wheel cutting machine, also called grinding wheel saw, grinding wheel cutting machine is suitable for construction, hardware, petrochemical, mechanical metallurgy and hydropower installation. Grinding wheel cutting machine can be used for metal flat tube, flat steel, I-shaped steel, channel steel, carbon steel, Yuan Guan and other materials commonly used equipment, then, how to use the correct cutting wheel machine? What precautions are there in use?
The use of grinding wheel cutting machine:
First, the grinding wheel cutting machine should be placed on a stable ground, should be away from flammable items, and the power line should be connected to the leakage protection device.
Second, the grinding wheel cutting sheet should be installed according to the requirements. The start-up operation should be stable before starting work.
Third, the clamping device should be safe and reliable to prevent accidental loose workpiece.
Fourth, the operator should cut evenly while cutting and avoid the front side of the cutting blade to prevent accidents caused by improper handling of the cutting blade.
5. After the work is completed, the dust on the surface of the grinding wheel cutting machine should be wiped and the workplace should be cleaned up. Open storage should have rain-proof measures.
Precautions:
1. The operation box or switch must be intact and must have ground protection.
2. When the joystick is used for cutting movement, the force should be uniform and steady, and do not use too much force to avoid the overload to make the cutting wheel of the grinding wheel crack.
3, Check the clamping device of the grinding wheel cutting machine should be flexible, reliable clamping, hand wheel, screw, nut, etc. should be intact.
4. The grinding wheel cutting machine lever should have enough strength and rigidity, and can keep the grinding wheel free to lift after loading all the parts.
5. The lever shaft should be in good condition, with flexible and reliable rotation, and be locked with the nut after assembly with the lever.
6. When changing the cutting wheel of the grinding wheel, the power must be cut off. Newly installed wheel cutting discs must meet equipment requirements.
7. After changing the cutting wheel of the grinding wheel, if there is obvious vibration after trial operation, it can be used after confirming normal operation.
8, the use of grinding wheel cutting machine should make the direction of rotation of the grinding wheel as far as possible to avoid the nearby staff, so as not to injure others.
9. The support wheel should be completely intact, firmly installed, and flexible in rotation. The arrangement should be balanced and reliable, and there must be no obvious vibration during work.
10. The protective cover of the transmission and grinding wheel must be safe and reliable, and it can block the flying debris after the wheel breaks. The baffle on the end should be firmly mounted on the cover and must not be removed during operation.
11. After the operation is completed, cut off the power immediately and put it in order.

BRIEF INTRODUCTION

Henan Yuteng Grinding Material Co., Ltd. is located in Kaifeng City, Henan Province. Is a set of production, research and development, service as one of the grinding agent, grinding, polishing products professional company, specializing in the production and sales of coated grinding tools derived ancillary products: flocking sand disc, blade, all kinds of special-shaped grinding disc, sponge grinding block, steel paper disk, ring sand belt, sand ring and automotive polishing products.

Our main products are Velcro Disc,Abrasive Paper,Fiber Disc,Flap Disc,Abrasive Cloth,Abrasive Belt.

Relying on the advantages of the industrial base, the company has advanced production equipment and strong technical force, complete testing equipment to ensure that the products are sharp, wear-resistant and high strength, and the product quality reaches the advanced level of similar international products.

Our products can be used for all kinds of metal watches and stainless steel, alloy steel, non-alloy steel, non-ferrous metals, titanium alloy and other grinding and wire drawing, polishing and so on; Wood, high-medium fiberboard, flower board, composite board, glass, rubber and other table grinding and polishing. Widely used in automobile, steel, building materials, shipping, aviation, wood, plastic, leather and other industries.

We provide customers with the best surface treatment program, according to the actual needs of customers "tailored" a variety of specifications of sand pan, sand belt, sand carbon and emery cloth ring polishing products.

The company's flexible operating mechanism and all customer-centric concept, we in addition to provide you  standardized, serialized products, but also according to your special requirements, for you to manufacture high-quality, personalized non-standard coated with abrasive products.