Floor grinding renovation method Floor polishing renovation notes

Nowadays, people's demands for quality of life are getting higher and higher. This is reflected in the decoration. Large to the living room, small to the corner, and the floor is also a place to pay attention to, the place is closely related to our daily work, high-quality flooring can make your home life more comfortable. Next, Xiao Bian will introduce floor- renovation methods and floor-polishing notices.

Floor polishing renovation method

1, floor grinding

The first thing to do in the renovation of the floor is to remove 1-2 mm of the surface of the old floor paint, and also to take measures to protect the floor during the renovation. Make sure that the polished floor surface is smooth and delicate. The larger the number of sandpaper meshes, the smaller the particles and the less noticeable the scratches left after polishing.

2, putty knife coating

After the floor is polished, the surface is very smooth, but it is not necessarily smooth. It needs to be leveled with a putty powder, and a layer of putty should be scraped on the polished floor. Spread evenly and wait to dry.

3, primer color

The floor coloring should be done when sanding the floor, because the color of the floor is inconsistent. Because the floor texture is natural, the color cannot be changed. Just adjust the depth of the floor color to make it consistent. .

4, the top paint

After the primer has dried, brush finish can be applied. After the first coat of paint is dry, grind it with sandpaper again to give the surface a slightly rough effect. Blow off the dust on the surface and brush the second coat of paint.

5. Polishing and waxing the floor

The final step is polishing and waxing. Use professional floor wax to apply it on the floor. Make sure that every corner of the floor can be painted. Always pay attention to the maintenance of the floor to avoid damage to the floor caused by sharp objects.

Floor polishing renovation note

1, before the renovation of clean room furniture

Before the renovation of the floor, all the furniture in the room should be removed. This will ensure that the furniture will not be exposed to dust, and it will also facilitate the renovation of the floor.

2, should choose a special floor paint

Floor renovation requires the use of paint refurbishment, it is best to use water-based environmental protection paint, when the purchase of floor paint, we must pay attention to see the product's wear resistance, check the certificate to ensure good environmental protection.

3, floor brushing times

The floor is polished and refurbished. It is better to paint the paint several times, so that the surface of the refurbished floor will not be flawed.

Editor's summary: The floor polishing method and the floor polishing and refurbishing precautions are introduced here, and we hope to help everyone. If you want to know more related information, you can pay attention to this website information.

Solid wood floor sanding

BRIEF INTRODUCTION

Henan Yuteng Grinding Material Co., Ltd. is located in Kaifeng City, Henan Province. Is a set of production, research and development, service as one of the grinding agent, grinding, polishing products professional company, specializing in the production and sales of coated grinding tools derived ancillary products: flocking sand disc, blade, all kinds of special-shaped grinding disc, sponge grinding block, steel paper disk, ring sand belt, sand ring and automotive polishing products.

Our main products are Velcro Disc,Abrasive Paper,Fiber Disc,Flap Disc,Abrasive Cloth,Abrasive Belt.

Relying on the advantages of the industrial base, the company has advanced production equipment and strong technical force, complete testing equipment to ensure that the products are sharp, wear-resistant and high strength, and the product quality reaches the advanced level of similar international products.

Our products can be used for all kinds of metal watches and stainless steel, alloy steel, non-alloy steel, non-ferrous metals, titanium alloy and other grinding and wire drawing, polishing and so on; Wood, high-medium fiberboard, flower board, composite board, glass, rubber and other table grinding and polishing. Widely used in automobile, steel, building materials, shipping, aviation, wood, plastic, leather and other industries.

We provide customers with the best surface treatment program, according to the actual needs of customers "tailored" a variety of specifications of sand pan, sand belt, sand carbon and emery cloth ring polishing products.

The company's flexible operating mechanism and all customer-centric concept, we in addition to provide you  standardized, serialized products, but also according to your special requirements, for you to manufacture high-quality, personalized non-standard coated with abrasive products.