Check valve technical parameters details

Clamp check valve, also known as counter-flow valve, check valve, back pressure valve, check valve. This kind of valve is automatically opened and closed by the force generated by the flow of the medium itself in the pipeline, which belongs to an automatic valve.

Check valve for piping systems, its main role is to prevent media backflow, to prevent the pump and its drive motor reversal, as well as the container media release. Check valves are also used on lines where the pressure may rise to a level above the pressure of the main system auxiliary system. Check valve according to the different materials, can be applied to a variety of media on the pipeline. Check valve installed in the pipeline, that is to become the complete pipeline of the fluid components, the valve opening and closing process will be affected by the transient state of the system it is affected; in turn, the valve closing characteristics Occurrence of fluid flow on the state of action.

Clamp check valve for nominal pressure PN1.0MPa ~ 42.0MPa, Class150 ~ 2500; Nominal diameter DN12 ~ 1200mm, NPS1 / 2 ~ 48; Operating temperature -196 ~ 540 ℃ on the various pipelines, to prevent Media backwards. Through the selection of different materials, can be applied to water, steam, oil, nitric acid, acetic acid, strong oxidizing media and urea and other media.

Standards and norms

1, Design and manufacture: API 594, API 6D, JB / T 8937;

2, the length of the structure: API 594, API 6D, DIN 3202, JB / T 8937;

3, pressure - temperature class: ANSI B 16.34, DIN 2401, GB / T 9124, HG 20605, SH 3406, JB / T 74;

4, test and test: API 598, JB / T 9092;

Pipe flange: JB / T 74 ~ 90, GB / T 9112 ~ 9124, HG 20592 ~ 20635, SH 3406, ANSI B 16.5, DIN 2543 ~ 2548, GB / T 13402, API 605, ASME B 16.47.

Structural features

1, the structure of the short length, the length of the structure only traditional flange check valve 1/4 ~ 1/8;

2, small size, light weight, the weight of only traditional flange check valve 1/4 ~ 1/20;

3, and the valve closed quickly, water hammer pressure is small;

4, horizontal pipe or vertical pipe can be used, installation;

5, smooth flow path, fluid resistance is small;

6, action sensitive, good sealing performance;

7, valve stroke is short, off valve impact is small;

8, the overall structure, simple and compact, handsome in appearance;

9, long service life, high reliability

BRIEF INTRODUCTION

Henan Yuteng Grinding Material Co., Ltd. is located in Kaifeng City, Henan Province. Is a set of production, research and development, service as one of the grinding agent, grinding, polishing products professional company, specializing in the production and sales of coated grinding tools derived ancillary products: flocking sand disc, blade, all kinds of special-shaped grinding disc, sponge grinding block, steel paper disk, ring sand belt, sand ring and automotive polishing products.

Our main products are Velcro Disc,Abrasive Paper,Fiber Disc,Flap Disc,Abrasive Cloth,Abrasive Belt.

Relying on the advantages of the industrial base, the company has advanced production equipment and strong technical force, complete testing equipment to ensure that the products are sharp, wear-resistant and high strength, and the product quality reaches the advanced level of similar international products.

Our products can be used for all kinds of metal watches and stainless steel, alloy steel, non-alloy steel, non-ferrous metals, titanium alloy and other grinding and wire drawing, polishing and so on; Wood, high-medium fiberboard, flower board, composite board, glass, rubber and other table grinding and polishing. Widely used in automobile, steel, building materials, shipping, aviation, wood, plastic, leather and other industries.

We provide customers with the best surface treatment program, according to the actual needs of customers "tailored" a variety of specifications of sand pan, sand belt, sand carbon and emery cloth ring polishing products.

The company's flexible operating mechanism and all customer-centric concept, we in addition to provide you  standardized, serialized products, but also according to your special requirements, for you to manufacture high-quality, personalized non-standard coated with abrasive products.